mmc has detected an error in a snap-in and will unload it

Here you can find everything you need to know about Dll-Files. You can also share your knowledge regarding the topic.

Moderators: DllAdmin, DLLADMIN ONLY

Re: mmc has detected an error in a snap-in and will unload i

Postby spirit » 02 Jul 2009, 08:24

Download and reinstall NET Framework 3.51

http://www.microsoft.com/downloads/deta ... laylang=en

Are you using Disk Keeper?

Update your Video Driver (actually go to maker's site, DO NOT run
Device Manager - Check for Updates)

There is also a system policy setting that can cause this issue.

http://www.insidetheregistry.com/regdat ... ?keyid=832

"ACDCFAN" <ACDCFAN.3uowvb@news.home.local> wrote in message
news:ACDCFAN.3uowvb@news.home.local...
>
> Hi all
> As you can see I have a problem with Event viewer and Task Scheduler. I
> am unable to load event viewer with following error
>
> I get following error with couple of options
>
> -1 Report this to Microsoft and shut down MMC
> 2 Unload the sanp in and continue running
>
> After I choose second option I get another screen with following error
>
> FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
>
> Exception has been thrown by the target of an invocation.
>
> Exception type
> System.Reflection.TargetInvocationException
> Exception Stack trace
>
> at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean
> publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle&
> ctor, Boolean& bNeedSecurityCheck)
> at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean
> fillCache)
> at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean
> skipVisibilityChecks, Boolean fillCache)
> at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> at Microsoft.ManagementConsole.FormView.InternalInitialize()
> at
> Microsoft.ManagementConsole.View.HandleInitializationRequest(IRequestStatus
> requestStatus)
> at Microsoft.ManagementConsole.View.ProcessRequest(Request request)
> at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(IMessageClient
> messageClient, RequestInfo requestInfo)
> at
> Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
> at
> Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(SimpleOperationCallback
> callback) -
>
> And also with Task Scheduler but wtih the different FX error
> -FX:{c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4} -
>
> Now I have run scfscannow and no error found.... I tried to to
> re-register *.dll files by using note pad and command
> C:\users\admninistrator\registeradminpak.cmd and that did not work.
>
> Repair install or repair computer is my last option but I am not sure
> if that will work because everything else works fine....I don't know
> when it stopped working because I haven't been checking event viewer for
> a long time. Reason form wanting to check is that 3rd party side bar
> application worked fine one and day and next it decided not to.
>
> Can you please help or repair computer from a vista DVD is my last
> option. IF I do it, what will it do to my updates?
>
> Thanks
> ACDCFAN
>
>
> --
> ACDCFAN
> Posted via http://ms-os.com Forum to Usenet gateway
>
spirit
 
Posts: 8
Joined: 25 Jun 2009, 23:00

Re: mmc has detected an error in a snap-in and will unload i

Postby spirit » 02 Jul 2009, 18:26

REPAIR it :)

"ACDCFAN" <ACDCFAN.3up7za@news.home.local> wrote in message
news:ACDCFAN.3up7za@news.home.local...
>
> Spirit;1083346 Wrote:
>> Download and reinstall NET Framework 3.51
>>
>> 'Download details: .NET Framework 3.5 Service pack 1'
>> (http://tinyurl.com/5t9uol)
>>
>> Are you using Disk Keeper?
>>
>> Update your Video Driver (actually go to maker's site, DO NOT run
>> Device Manager - Check for Updates)
>>
>> There is also a system policy setting that can cause this issue.
>>
>> 'Information About The Registry Key
>> 'FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}''
>> (http://www.insidetheregistry.com/regdat ... ?keyid=832)
>>
>> "ACDCFAN" <ACDCFAN.3uowvb@news.home.local> wrote in message
>> news:ACDCFAN.3uowvb@news.home.local...
>> >
>> > Hi all
>> > As you can see I have a problem with Event viewer and Task Scheduler.
>> I
>> > am unable to load event viewer with following error
>> >
>> > I get following error with couple of options
>> >
>> > -1 Report this to Microsoft and shut down MMC
>> > 2 Unload the sanp in and continue running
>> >
>> > After I choose second option I get another screen with following
>> error
>> >
>> > FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
>> >
>> > Exception has been thrown by the target of an invocation.
>> >
>> > Exception type
>> > System.Reflection.TargetInvocationException
>> > Exception Stack trace
>> >
>> > at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean
>> > publicOnly, Boolean noCheck, Boolean& canBeCached,
>> RuntimeMethodHandle&
>> > ctor, Boolean& bNeedSecurityCheck)
>> > at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean
>> > fillCache)
>> > at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean
>> > skipVisibilityChecks, Boolean fillCache)
>> > at System.Activator.CreateInstance(Type type, Boolean nonPublic)
>> > at Microsoft.ManagementConsole.FormView.InternalInitialize()
>> > at
>> >
>> Microsoft.ManagementConsole.View.HandleInitializationRequest(IRequestStatus
>> > requestStatus)
>> > at Microsoft.ManagementConsole.View.ProcessRequest(Request request)
>> > at
>> Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Request
>> > request)
>> > at
>> >
>> Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Request
>> > request)
>> > at
>> >
>> Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(IMessageClient
>> > messageClient, RequestInfo requestInfo)
>> > at
>> >
>> Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
>> > at
>> >
>> Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(SimpleOperationCallback
>> > callback) -
>> >
>> > And also with Task Scheduler but wtih the different FX error
>> > -FX:{c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4} -
>> >
>> > Now I have run scfscannow and no error found.... I tried to to
>> > re-register *.dll files by using note pad and command
>> > C:\users\admninistrator\registeradminpak.cmd and that did not work.
>> >
>> > Repair install or repair computer is my last option but I am not
>> sure
>> > if that will work because everything else works fine....I don't know
>> > when it stopped working because I haven't been checking event viewer
>> for
>> > a long time. Reason form wanting to check is that 3rd party side bar
>> > application worked fine one and day and next it decided not to.
>> >
>> > Can you please help or repair computer from a vista DVD is my last
>> > option. IF I do it, what will it do to my updates?
>> >
>> > Thanks
>> > ACDCFAN
>> >
>> >
>> > --
>> > ACDCFAN
>> > Posted via http://ms-os.com Forum to Usenet gateway
>> >
>
> Do I need to uninstall existing one and clean anything leftover? I
> have which 3.5 SP1
> I tried installing over the existing one, but it only cam up with
> repair or uninstall.....
> I don't use disc keeper at all.....
>
> And there are no entries, MMC , under the hex key explained by the link
> provided
>
>
> --
> ACDCFAN
> Posted via http://ms-os.com Forum to Usenet gateway
>
spirit
 
Posts: 8
Joined: 25 Jun 2009, 23:00


Return to Everything about Dll-Files

Who is online

Users browsing this forum: No registered users and 3 guests