script error “permission denied”

Do you need help with your Fixer? Ask a question here!

Moderators: DllAdmin, DLLADMIN ONLY

Post Reply
nhd68
Posts: 2
Joined: 25 Jun 2016, 13:47

script error “permission denied”

Post by nhd68 »

Hi,

After some automatic Windows updates (don’t know how, I had restricted that) my DLL Fixer works but shows initially an script error “permission denied” and than it works normally. I had reinstalled DLL Fixer but the problem continues.
Please advise,
Regards,
Nikolay Dimov
Attachments
2016-06-25_151738.png
2016-06-25_151738.png (56.52 KiB) Viewed 23854 times

nhd68
Posts: 2
Joined: 25 Jun 2016, 13:47

Re: script error “permission denied”

Post by nhd68 »

Problem solved:
1. Close any Internet Explorer or Windows Explorer windows that are currently open and close the application.
2. Open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then, in the list of results, click Internet Explorer OR Run Internet Explorer from a shortcut.
3. Click the Tools button, and then click Internet Options.
4. Click the Advanced tab, and then click Click “Restore advanced settings”.
5. Click “Reset”
6. A new dialog appears on clicking Reset: Select the Delete personal settings check box if you would like to remove browsing history, search providers, Accelerators, home pages, and InPrivate Filtering data. Click Reset.
7. When Internet Explorer finishes restoring the settings, Press “Apply” and “OK” button
8. Close Internet Explorer and restart computer.

Post Reply