claasc.dll. There is no message on my PC about this when I try to set memo +
claasc.dll. отсутствует на моем пк сообщение об этом появляется при попытке установить memo+
ClaASC.dll Help
Moderators: DllAdmin, DLLADMIN ONLY
Re: ClaASC.dll Help
Hello Igor,
You need help resolving an error message regarding the file claasc.dll ?
To help you, I would need some more information regarding your error.
What is the exact and complete error message you get regarding this file?
When do you get this error? At Windows start? When trying to start a specific program?
Which program is requesting this file? Look for "program".EXE in error message.
What have you tried so far for solving this error?
Which version of Windows are you using?
Are you fully up to date with Windows updates?
https://support.microsoft.com/en-us/hel ... ows-update
Best regards
Erik
DLL-Files.com
You need help resolving an error message regarding the file claasc.dll ?
To help you, I would need some more information regarding your error.
What is the exact and complete error message you get regarding this file?
When do you get this error? At Windows start? When trying to start a specific program?
Which program is requesting this file? Look for "program".EXE in error message.
What have you tried so far for solving this error?
Which version of Windows are you using?
Are you fully up to date with Windows updates?
https://support.microsoft.com/en-us/hel ... ows-update
Best regards
Erik
DLL-Files.com
Re: ClaASC.dll Help
when trying to install the memo program + pops up a window: The launch of the program is not possible because claasc.dll is missing on the computer. Try reinstalling the program. I have Windows 7. I tried all the methods I found on the Internet
Re: ClaASC.dll Help
What is the name of this "memo program"?
Which program is requesting this file? Look for "program".EXE in error message.
What have you tried so far for solving this error?
Are you fully up to date with Windows updates?
https://support.microsoft.com/en-us/hel ... ows-update
Best regards
Erik
DLL-Files.com
Which program is requesting this file? Look for "program".EXE in error message.
What have you tried so far for solving this error?
Are you fully up to date with Windows updates?
https://support.microsoft.com/en-us/hel ... ows-update
Best regards
Erik
DLL-Files.com
Re: ClaASC.dll Help
I'm not trying to reinstall or update Windows 7
I'm trying to install a program called memo +
When you run the installation file, the EXE program drops a window that a file is missing
sorry for my English
I tried to update Direct X
also tried various programs for finding and fixing dll errors
as I said earlier, I have installed Windows 7 licensed in the update center there is no update
I'm trying to install a program called memo +
When you run the installation file, the EXE program drops a window that a file is missing
sorry for my English
I tried to update Direct X
also tried various programs for finding and fixing dll errors
as I said earlier, I have installed Windows 7 licensed in the update center there is no update
Re: ClaASC.dll Help
Which program is requesting this file? Look for "program".EXE in error message.
What have you tried so far for solving this error?
I can not find any programs named "memo +". Do you have a link to where I can find this program, or at least find some information about it?
What have you tried so far for solving this error?
I can not find any programs named "memo +". Do you have a link to where I can find this program, or at least find some information about it?
Re: ClaASC.dll Help
claasc.dll is available for download at https://www.dll-files.com/claasc.dll.html
Instructions on how to resolve a dll error can be found at https://www.dll-files.com/support/
Instructions on how to resolve a dll error can be found at https://www.dll-files.com/support/
Re: ClaASC.dll Help
Спасибо вам большое. Буду пробовать устанавливать
Re: ClaASC.dll Help
claasc.dll is available for download at https://www.dll-files.com/claasc.dll.html
claasc.dll доступен для загрузки по адресу https://ru.dll-files.com/claasc.dll.html
claasc.dll доступен для загрузки по адресу https://ru.dll-files.com/claasc.dll.html
Re: ClaASC.dll Help
Tell me which folder I need to put this file.
Re: ClaASC.dll Help
Instructions on how to resolve a dll error can be found at https://www.dll-files.com/support/
From https://www.dll-files.com/support/ :
GENERAL
How do I install the DLL-file I have downloaded from DLL-files.com ?
Step 1
Open the zip-file you downloaded from DLL-files.com .
Extract the DLL-file to a location on your computer.
After extracting your zip-file, place the extracted DLL-file in the directory of the program that is requesting the file. Make sure to use a 32bit DLL-file for a 32bit program, and a 64bit DLL-file for a 64bit program. Failure to do so will likely result in a 0xc000007b error.
Step 2
If that does not help your problem, place the file to your system directory.
By default, this is
C:\Windows\System (Windows 95/98/Me),
C:\WINNT\System32 (Windows NT/2000), or
C:\Windows\System32 (Windows XP, Vista, 7, 8, 8.1, 10).
On a 64bit version of Windows, the default folder for 32bit DLL-files is C:\Windows\SysWOW64\ , and for 64bit dll-files C:\Windows\System32\ .
Make sure to overwrite any existing files (but make a backup copy of the original file).
Reboot your computer.
Step 3
If the problem still occurs, try the following to register the DLL-file:
For 32bit DLL-files on a 32bit Windows, and for 64bit DLL-files on a 64bit Windows:
Open an elevated command prompt.
To do this, click Start, click All Programs, click Accessories, right-click "Command Prompt", and then click Run as administrator.
In Windows 8/10, go to the Start screen. Start typing cmd and Windows will find "Command Prompt". Right click "Command Prompt" and choose "Run as administrator".
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
Type regsvr32 "filename".dll and press Enter.
Registering 32bit DLL-files on a 64bit Windows:
Open an elevated command prompt, as instructed above.
In the command prompt, start by typing following and press enter:
cd c:\windows\syswow64\
then type the following and press enter:
regsvr32 c:\windows\syswow64\"filename".dll
Finally, reboot your PC one last time to refresh the memory. That should do it!
From https://www.dll-files.com/support/ :
GENERAL
How do I install the DLL-file I have downloaded from DLL-files.com ?
Step 1
Open the zip-file you downloaded from DLL-files.com .
Extract the DLL-file to a location on your computer.
After extracting your zip-file, place the extracted DLL-file in the directory of the program that is requesting the file. Make sure to use a 32bit DLL-file for a 32bit program, and a 64bit DLL-file for a 64bit program. Failure to do so will likely result in a 0xc000007b error.
Step 2
If that does not help your problem, place the file to your system directory.
By default, this is
C:\Windows\System (Windows 95/98/Me),
C:\WINNT\System32 (Windows NT/2000), or
C:\Windows\System32 (Windows XP, Vista, 7, 8, 8.1, 10).
On a 64bit version of Windows, the default folder for 32bit DLL-files is C:\Windows\SysWOW64\ , and for 64bit dll-files C:\Windows\System32\ .
Make sure to overwrite any existing files (but make a backup copy of the original file).
Reboot your computer.
Step 3
If the problem still occurs, try the following to register the DLL-file:
For 32bit DLL-files on a 32bit Windows, and for 64bit DLL-files on a 64bit Windows:
Open an elevated command prompt.
To do this, click Start, click All Programs, click Accessories, right-click "Command Prompt", and then click Run as administrator.
In Windows 8/10, go to the Start screen. Start typing cmd and Windows will find "Command Prompt". Right click "Command Prompt" and choose "Run as administrator".
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
Type regsvr32 "filename".dll and press Enter.
Registering 32bit DLL-files on a 64bit Windows:
Open an elevated command prompt, as instructed above.
In the command prompt, start by typing following and press enter:
cd c:\windows\syswow64\
then type the following and press enter:
regsvr32 c:\windows\syswow64\"filename".dll
Finally, reboot your PC one last time to refresh the memory. That should do it!
Re: ClaASC.dll Help
Fulfilled all the necessary items Restarted computer when registering a file on the command line gives an error.
Re: ClaASC.dll Help
failed to load module
Check the binary files are stored in the specified location or run debugging to diagnose problems with this binary file depending.
Check the binary files are stored in the specified location or run debugging to diagnose problems with this binary file depending.