error message

Here you can find everything you need to know about Dll-Files. You can also share your knowledge regarding the topic.

Moderators: DllAdmin, DLLADMIN ONLY

Post Reply
lula
Posts: 2
Joined: 06 Mar 2009, 00:00

error message

Post by lula »

On startup - get an error message "error loading
c:\profram~1\MYWEBS~1\bar\3.bin\m3plugin.dll The specified module could not
be found".
There are 3 users on the laptop and all 3 get this message at startup. Has
only recently started. Seems OK to get into internet etc. Recently
disconnected/uninstalled HP printer - now cannot connect printer again. Says
installed but not showing. Unable to print - is this message connected? If
not, does anybody know what this is, what problems it may be causing and how
do I get rid of message?? Thanks

terry r.
Posts: 28
Joined: 06 Mar 2009, 00:00

Re: error message

Post by terry r. »

The date and time was Friday, March 06, 2009 8:15:01 AM, and on a whim,
Lula pounded out on the keyboard:

> On startup - get an error message "error loading
> c:\profram~1\MYWEBS~1\bar\3.bin\m3plugin.dll The specified module could not
> be found".
> There are 3 users on the laptop and all 3 get this message at startup. Has
> only recently started. Seems OK to get into internet etc. Recently
> disconnected/uninstalled HP printer - now cannot connect printer again. Says
> installed but not showing. Unable to print - is this message connected? If
> not, does anybody know what this is, what problems it may be causing and how
> do I get rid of message?? Thanks

Hi Lula,

It looks like someone uninstalled "Mywebsearch". Here is some info on it:
http://www.pchell.com/support/mywebsearch.shtml

You may want to go through the steps recommended to make sure all of it
is removed.

Regarding the HP printer, you may just have to reinstall the drivers.
Go to the HP site and enter the model number and the word "drivers" in
the search. Unfortunately, HP software installs a LOT of junk users
don't need just to print, so whoever reinstalls the software should pay
attention to exactly WHAT is being installed.

Terry R.
--
Anti-spam measures are included in my email address.
Delete NOSPAM from the email address after clicking Reply.

nass
Posts: 46
Joined: 06 Mar 2009, 00:00

RE: error message

Post by nass »

"Lula" wrote:

> On startup - get an error message "error loading
> c:\profram~1\MYWEBS~1\bar\3.bin\m3plugin.dll The specified module could not
> be found".
> There are 3 users on the laptop and all 3 get this message at startup. Has
> only recently started. Seems OK to get into internet etc. Recently
> disconnected/uninstalled HP printer - now cannot connect printer again. Says
> installed but not showing. Unable to print - is this message connected? If
> not, does anybody know what this is, what problems it may be causing and how
> do I get rid of message?? Thanks


Fun Web Products "My Web Search" Removal Instructions and Help
http://www.pchell.com/support/mywebsearch.shtml

Scan for malware from here:
http://onecare.live.com/site/en-gb/defa ... ?s_cid=sah
http://onecare.live.com/standard/en-gb/default.htm

You can download this tool "AutoRuns for Windows"
http://technet.microsoft.com/en-us/sysi ... 63902.aspx
And remove the entry from here:

Locate this key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run = look in
the right pane/window and remove the entry for it
"C:\program~1\MYWEBS~1\bar\3.bin\m3plugin.dll"

Run disk cleanup and defrag in safe mode. Then run this command:
sfc /scannow
HTH.
nass
---
http://www.nasstec.co.uk

pegasus
Posts: 1
Joined: 06 Mar 2009, 00:00

Re: error message

Post by pegasus »

"Lula" <Lula@discussions.microsoft.com> wrote in message
news:97C27ABF-3BD0-4412-94BA-05A5CDFF00E6@microsoft.com...
> On startup - get an error message "error loading
> c:\profram~1\MYWEBS~1\bar\3.bin\m3plugin.dll The specified module could
> not
> be found".
> There are 3 users on the laptop and all 3 get this message at startup. Has
> only recently started. Seems OK to get into internet etc. Recently
> disconnected/uninstalled HP printer - now cannot connect printer again.
> Says
> installed but not showing. Unable to print - is this message connected? If
> not, does anybody know what this is, what problems it may be causing and
> how
> do I get rid of message?? Thanks

Could be a residue of some malware/virus infection. Launch Windows Explorer
and have a look at the full folder name of c:\profram~1\MYWEBS~1, then
report it in your reply.

lula
Posts: 2
Joined: 06 Mar 2009, 00:00

RE: error message

Post by lula »

Worked - thanks Nass

"nass" wrote:

>
>
> "Lula" wrote:
>
> > On startup - get an error message "error loading
> > c:\profram~1\MYWEBS~1\bar\3.bin\m3plugin.dll The specified module could not
> > be found".
> > There are 3 users on the laptop and all 3 get this message at startup. Has
> > only recently started. Seems OK to get into internet etc. Recently
> > disconnected/uninstalled HP printer - now cannot connect printer again. Says
> > installed but not showing. Unable to print - is this message connected? If
> > not, does anybody know what this is, what problems it may be causing and how
> > do I get rid of message?? Thanks
>
>
> Fun Web Products "My Web Search" Removal Instructions and Help
> http://www.pchell.com/support/mywebsearch.shtml
>
> Scan for malware from here:
> http://onecare.live.com/site/en-gb/defa ... ?s_cid=sah
> http://onecare.live.com/standard/en-gb/default.htm
>
> You can download this tool "AutoRuns for Windows"
> http://technet.microsoft.com/en-us/sysi ... 63902.aspx
> And remove the entry from here:
>
> Locate this key:
> HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run = look in
> the right pane/window and remove the entry for it
> "C:\program~1\MYWEBS~1\bar\3.bin\m3plugin.dll"
>
> Run disk cleanup and defrag in safe mode. Then run this command:
> sfc /scannow
> HTH.
> nass
> ---
> http://www.nasstec.co.uk

Post Reply