Direct X 9C missing file d3dx9_33.dll

Here you can find everything you need to know about Dll-Files. You can also share your knowledge regarding the topic.

Moderators: DllAdmin, DLLADMIN ONLY

Post Reply
harold a. climer
Posts: 7
Joined: 20 May 2009, 23:00

Direct X 9C missing file d3dx9_33.dll

Post by harold a. climer »

I am having trouble using Roxio Easy Media Creator 10 (Easy DVD and
Video Wave) with Windows XP MCE with SP3 installed.
I keep getting an error message that the following file is missing.
d3dx9_33.dll
It is supposed to be installed by DirectX 9C but I can not find it
anywhere on my hard drive.
I have tried all the suggestions from the Roxio Web site:
1.Clean Install of the EMC10
2.Re-Install DirectX 9C
3.Turn off Video Hardware acceleration( then EMC 10 says I do not have
enough resources to run the program)
but nothing works.
Any idea as to what is going on?
Where can a get this file and where should it be located on my hard
drive?
I have a Radeon X1300 graphics Card.

I have not found anything else on this topic at the Roxio site, so I
am trying here.
Any help would be most appreciated.
Harold A Climer
Dept. Of Physics Geology, and Astronomy
U.T, Chattanooga
Rm. 406A Engineering, Math & Computer Science Building
615 McCallie Ave. Chattanooga TN 37403
Harold-Cimer@utc.edu

advertisement
harold a. climer
Posts: 7
Joined: 20 May 2009, 23:00

Re: Direct X 9C missing file d3dx9_33.dll

Post by harold a. climer »

On Thu, 25 Jun 2009 23:23:12 -0400, Paul <nospam@needed.com> wrote:

>Harold A. Climer wrote:
>> I am having trouble using Roxio Easy Media Creator 10 (Easy DVD and
>> Video Wave) with Windows XP MCE with SP3 installed.
>> I keep getting an error message that the following file is missing.
>> d3dx9_33.dll
>> It is supposed to be installed by DirectX 9C but I can not find it
>> anywhere on my hard drive.
>> I have tried all the suggestions from the Roxio Web site:
>> 1.Clean Install of the EMC10
>> 2.Re-Install DirectX 9C
>> 3.Turn off Video Hardware acceleration( then EMC 10 says I do not have
>> enough resources to run the program)
>> but nothing works.
>> Any idea as to what is going on?
>> Where can a get this file and where should it be located on my hard
>> drive?
>> I have a Radeon X1300 graphics Card.
>>
>> I have not found anything else on this topic at the Roxio site, so I
>> am trying here.
>> Any help would be most appreciated.
>> Harold A Climer
>> Dept. Of Physics Geology, and Astronomy
>> U.T, Chattanooga
>> Rm. 406A Engineering, Math & Computer Science Building
>> 615 McCallie Ave. Chattanooga TN 37403
>> Harold-Cimer@utc.edu
>
>http://kb.roxio.com/search.aspx?URL=/co ... -locale=en
>
> "d3dx9_33.dll was not found"
>
> Issue
>



I did not get EMC 10 on a CD. It was a download.
> When launching MyDVD or VideoWave, you receive an error message:
>
> The application failed to start because d3dx9_33.dll was not found"
>
>They suggest installing the DirectX 9 included on the Roxio CD.
>
> Paul
Harold A. Climer
Dept Of Physics Geology & Astronomy
U.T. Chattanooga
Room 406A Engineering,Math & Computer Sicence Building
615 McCallie Ave.
Chattanooga TN 37403
Harold-Climer@utc.edu

kelly
Posts: 13
Joined: 13 Mar 2009, 00:00

Re: Direct X 9C missing file d3dx9_33.dll

Post by kelly »

http://www.dll-files.com/dllindex/dll-f ... l?d3dx9_33

--

All the Best,
Kelly (MS-MVP/DTS&XP)

Taskbar Repair Tool Plus!
http://www.kellys-korner-xp.com/taskbarplus!.htm


"Harold A. Climer" <Harold-Climer@utc.edu> wrote in message
news:f22a45pbkhpmi8jbad0sms8fjl3p3fvd58@4ax.com...
> On Thu, 25 Jun 2009 23:23:12 -0400, Paul <nospam@needed.com> wrote:
>
>>Harold A. Climer wrote:
>>> I am having trouble using Roxio Easy Media Creator 10 (Easy DVD and
>>> Video Wave) with Windows XP MCE with SP3 installed.
>>> I keep getting an error message that the following file is missing.
>>> d3dx9_33.dll
>>> It is supposed to be installed by DirectX 9C but I can not find it
>>> anywhere on my hard drive.
>>> I have tried all the suggestions from the Roxio Web site:
>>> 1.Clean Install of the EMC10
>>> 2.Re-Install DirectX 9C
>>> 3.Turn off Video Hardware acceleration( then EMC 10 says I do not have
>>> enough resources to run the program)
>>> but nothing works.
>>> Any idea as to what is going on?
>>> Where can a get this file and where should it be located on my hard
>>> drive?
>>> I have a Radeon X1300 graphics Card.
>>>
>>> I have not found anything else on this topic at the Roxio site, so I
>>> am trying here.
>>> Any help would be most appreciated.
>>> Harold A Climer
>>> Dept. Of Physics Geology, and Astronomy
>>> U.T, Chattanooga
>>> Rm. 406A Engineering, Math & Computer Science Building
>>> 615 McCallie Ave. Chattanooga TN 37403
>>> Harold-Cimer@utc.edu
>>
>>http://kb.roxio.com/search.aspx?URL=/co ... -locale=en
>>
>> "d3dx9_33.dll was not found"
>>
>> Issue
>>
>
>
>
> I did not get EMC 10 on a CD. It was a download.
>> When launching MyDVD or VideoWave, you receive an error message:
>>
>> The application failed to start because d3dx9_33.dll was not found"
>>
>>They suggest installing the DirectX 9 included on the Roxio CD.
>>
>> Paul
> Harold A. Climer
> Dept Of Physics Geology & Astronomy
> U.T. Chattanooga
> Room 406A Engineering,Math & Computer Sicence Building
> 615 McCallie Ave.
> Chattanooga TN 37403
> Harold-Climer@utc.edu

Post Reply