"k" wrote:
>
>
> "nass" wrote:
>
> >
> >
> > "k" wrote:
> >
> > > when i try to add a network place in network places i receive the following
> > > error - error in netplwiz.dll Missing entry: AddNetPlaceRunDll" - does anyone
> > > know how i can stop this please, any help would be really appreciated...karl
> >
> > Does this happen if you run it from The Run Command Carl?
> >
> > Did you create the shares and allowed the LAN Traffic through the Firewall
> > to be allowed?
> >
> > What happen if you re-register the dll like so:
> > run >> type in the txt box:
> > regsvr32 netplwiz.dll
> > Reboot your machine and see if it will be solved.
> > Run the system file checker on your machine.
> > Can this machine see the other machines on the Workgroup and vice versa with
> > the other machine?
> > HTH,
> > nass
> > ---
> >
http://www.nasstec.co.uk
> >
>
> Hi nass, thanks for the response. i'm not very good with this sort of stuff
> but i tried to re-register the dll as you suggested but has made no
> difference. don't currently have a firewall running. how do i run the system
> file checker and what should i be looking for? any further help would be
> appreciated thanks.
Run a thorough scan for malware and viruses then try this:
Open a run command and type in:
sfc /scannow click [OK] and pay attention to it, as it may ask for the
Windows isnstallation media to be inserted.
HTH