Re: mmc has detected an error in a snap-in and will unload i
Posted: 02 Jul 2009, 08:24
Download and reinstall NET Framework 3.51
http://www.microsoft.com/downloads/deta ... laylang=en
Are you using Disk Keeper?
Update your Video Driver (actually go to maker's site, DO NOT run
Device Manager - Check for Updates)
There is also a system policy setting that can cause this issue.
http://www.insidetheregistry.com/regdat ... ?keyid=832
"ACDCFAN" <ACDCFAN.3uowvb@news.home.local> wrote in message
news:ACDCFAN.3uowvb@news.home.local...
>
> Hi all
> As you can see I have a problem with Event viewer and Task Scheduler. I
> am unable to load event viewer with following error
>
> I get following error with couple of options
>
> -1 Report this to Microsoft and shut down MMC
> 2 Unload the sanp in and continue running
>
> After I choose second option I get another screen with following error
>
> FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
>
> Exception has been thrown by the target of an invocation.
>
> Exception type
> System.Reflection.TargetInvocationException
> Exception Stack trace
>
> at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean
> publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle&
> ctor, Boolean& bNeedSecurityCheck)
> at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean
> fillCache)
> at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean
> skipVisibilityChecks, Boolean fillCache)
> at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> at Microsoft.ManagementConsole.FormView.InternalInitialize()
> at
> Microsoft.ManagementConsole.View.HandleInitializationRequest(IRequestStatus
> requestStatus)
> at Microsoft.ManagementConsole.View.ProcessRequest(Request request)
> at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(IMessageClient
> messageClient, RequestInfo requestInfo)
> at
> Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
> at
> Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(SimpleOperationCallback
> callback) -
>
> And also with Task Scheduler but wtih the different FX error
> -FX:{c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4} -
>
> Now I have run scfscannow and no error found.... I tried to to
> re-register *.dll files by using note pad and command
> C:\users\admninistrator\registeradminpak.cmd and that did not work.
>
> Repair install or repair computer is my last option but I am not sure
> if that will work because everything else works fine....I don't know
> when it stopped working because I haven't been checking event viewer for
> a long time. Reason form wanting to check is that 3rd party side bar
> application worked fine one and day and next it decided not to.
>
> Can you please help or repair computer from a vista DVD is my last
> option. IF I do it, what will it do to my updates?
>
> Thanks
> ACDCFAN
>
>
> --
> ACDCFAN
> Posted via http://ms-os.com Forum to Usenet gateway
>
http://www.microsoft.com/downloads/deta ... laylang=en
Are you using Disk Keeper?
Update your Video Driver (actually go to maker's site, DO NOT run
Device Manager - Check for Updates)
There is also a system policy setting that can cause this issue.
http://www.insidetheregistry.com/regdat ... ?keyid=832
"ACDCFAN" <ACDCFAN.3uowvb@news.home.local> wrote in message
news:ACDCFAN.3uowvb@news.home.local...
>
> Hi all
> As you can see I have a problem with Event viewer and Task Scheduler. I
> am unable to load event viewer with following error
>
> I get following error with couple of options
>
> -1 Report this to Microsoft and shut down MMC
> 2 Unload the sanp in and continue running
>
> After I choose second option I get another screen with following error
>
> FX:{b05566ad-fe9c-4363-be05-7a4cbb7cb510}
>
> Exception has been thrown by the target of an invocation.
>
> Exception type
> System.Reflection.TargetInvocationException
> Exception Stack trace
>
> at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean
> publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle&
> ctor, Boolean& bNeedSecurityCheck)
> at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean
> fillCache)
> at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean
> skipVisibilityChecks, Boolean fillCache)
> at System.Activator.CreateInstance(Type type, Boolean nonPublic)
> at Microsoft.ManagementConsole.FormView.InternalInitialize()
> at
> Microsoft.ManagementConsole.View.HandleInitializationRequest(IRequestStatus
> requestStatus)
> at Microsoft.ManagementConsole.View.ProcessRequest(Request request)
> at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Request
> request)
> at
> Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(IMessageClient
> messageClient, RequestInfo requestInfo)
> at
> Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
> at
> Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(SimpleOperationCallback
> callback) -
>
> And also with Task Scheduler but wtih the different FX error
> -FX:{c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4} -
>
> Now I have run scfscannow and no error found.... I tried to to
> re-register *.dll files by using note pad and command
> C:\users\admninistrator\registeradminpak.cmd and that did not work.
>
> Repair install or repair computer is my last option but I am not sure
> if that will work because everything else works fine....I don't know
> when it stopped working because I haven't been checking event viewer for
> a long time. Reason form wanting to check is that 3rd party side bar
> application worked fine one and day and next it decided not to.
>
> Can you please help or repair computer from a vista DVD is my last
> option. IF I do it, what will it do to my updates?
>
> Thanks
> ACDCFAN
>
>
> --
> ACDCFAN
> Posted via http://ms-os.com Forum to Usenet gateway
>