XP start up doesn't work, stops at empty screen, after Wel..

Here you can find everything you need to know about Dll-Files. You can also share your knowledge regarding the topic.

Moderators: DllAdmin, DLLADMIN ONLY

Post Reply
mm
Posts: 38
Joined: 28 Jul 2009, 23:00

XP start up doesn't work, stops at empty screen, after Welco

Post by mm »

I suddently can't start XP.

I am on the same computer but running win98 now and I would look at
the events that the event-viewer displays but I can't guess what the
file name would be.

I didn't install anything or change anything except that yesterday I
did install in Firefox3 an add-on called Stylish recommended by a
smart guy in the netcape.public.mozilla.broswer newsgroup, with one
script that makes visited links display in red in Firefox/Google. I
had that installed for hours yesterday, then hibernated, and started
up today and again ran with it installed for hours.

(But it's not trying to start out of hibernation now afaict, and I'm
not starting Firefox.)

Today I was out of the room and I came back and it looked like XP
restarted, but only got as far as the blank (blue in my case) screen
after the Welcome to XP screen.

The screen that would have icons and a task bar in a few seconds if it
were working.

Trying to Start with last Working Configuration gave the same results.

Trying to start in debugging mode gave the same results with no
indication of why it is called debugging mode. (OH, I see now it uses
another computer and a serial cable. Oh well.)

Trying to Start in Safe Mode yielded the question, roughtly: Do you
want to Restore? When I said No, I got a blank black screeen with
"Safe Mode in all four corners and a file name in something on the top
line.
When I said Yes, I got a mesage that: Restore cannot
protect my computer.

Trying to start with the Directory Service Restore Mode gave the same
result as a nomral start iirc. I don't know if I have Windows-based
domain controllers or not.

With one method of starting, it displays a list of files started and
the last one shown relates to "Loaded driver amdagp.sys", which is
also in the boot log and is the last succesful load before all the
"Did not load driver" lines. Although I learned in win98, it could
do a lot of things without displaying anything

I can't find anything equivalent to win98 step-by-step booting. I
miss that.



Here is the start of the ntbtlog.txt, 24 successful lines, followed by
hundreds of "Did not load driver" lines with occasional lines
interspersed like:
Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys

--start log--
Service Pack 3 5 25 2009 19:15:54.500
Loaded driver \WINDOWS\system32\ntoskrnl.exe
Loaded driver \WINDOWS\system32\hal.dll
Loaded driver \WINDOWS\system32\KDCOM.DLL
Loaded driver \WINDOWS\system32\BOOTVID.dll
Loaded driver ACPI.sys
Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
Loaded driver pci.sys
Loaded driver isapnp.sys
Loaded driver viaide.sys
Loaded driver \WINDOWS\System32\DRIVERS\PCIIDEX.SYS
Loaded driver MountMgr.sys
Loaded driver ftdisk.sys
Loaded driver PartMgr.sys
Loaded driver VolSnap.sys
Loaded driver atapi.sys
Loaded driver disk.sys
Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
Loaded driver fltmgr.sys
Loaded driver sr.sys
Loaded driver Fastfat.sys
Loaded driver KSecDD.sys
Loaded driver NDIS.sys
Loaded driver Mup.sys
Loaded driver amdagp.sys
Did not load driver Advanced Configuration and Power Interface (ACPI)
PC
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
,,,,

In the middle a few lines like
.....
Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys
.....
amongst hundreds of other "Did not load driver" lines.


And finally, the final lines of the log are:
.....
Loaded driver Fastfat.SYS
Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS
Did not load driver Processor
Did not load driver ECP Printer Port
Did not load driver Communications Port
Did not load driver Communications Port
Did not load driver CMI8738/C3DX PCI Audio Device
Did not load driver ATI Technologies Inc. 3D RAGE II+ PCI
Did not load driver Audio Codecs
Did not load driver Legacy Audio Drivers
Did not load driver Media Control Devices
Did not load driver Legacy Video Capture Devices
Did not load driver Video Codecs
Loaded driver \SystemRoot\System32\DRIVERS\ndisuio.sys
--end log--

Thanks a lot for any help you can give.

rich barry
Posts: 9
Joined: 03 Apr 2009, 23:00

Re: XP start up doesn't work, stops at empty screen, after W

Post by rich barry »

Check below on doing a Repair Install. You will need a WinXP CD.
http://michaelstevenstech.com/XPrepairinstall.htm

"mm" <NOPSAMmm2005@bigfoot.com> wrote in message
news:6hp1759eplclcu6qli5dj7n0bp0g6juq7u@4ax.com...
>I suddently can't start XP.
>
> I am on the same computer but running win98 now and I would look at
> the events that the event-viewer displays but I can't guess what the
> file name would be.
>
> I didn't install anything or change anything except that yesterday I
> did install in Firefox3 an add-on called Stylish recommended by a
> smart guy in the netcape.public.mozilla.broswer newsgroup, with one
> script that makes visited links display in red in Firefox/Google. I
> had that installed for hours yesterday, then hibernated, and started
> up today and again ran with it installed for hours.
>
> (But it's not trying to start out of hibernation now afaict, and I'm
> not starting Firefox.)
>
> Today I was out of the room and I came back and it looked like XP
> restarted, but only got as far as the blank (blue in my case) screen
> after the Welcome to XP screen.
>
> The screen that would have icons and a task bar in a few seconds if it
> were working.
>
> Trying to Start with last Working Configuration gave the same results.
>
> Trying to start in debugging mode gave the same results with no
> indication of why it is called debugging mode. (OH, I see now it uses
> another computer and a serial cable. Oh well.)
>
> Trying to Start in Safe Mode yielded the question, roughtly: Do you
> want to Restore? When I said No, I got a blank black screeen with
> "Safe Mode in all four corners and a file name in something on the top
> line.
> When I said Yes, I got a mesage that: Restore cannot
> protect my computer.
>
> Trying to start with the Directory Service Restore Mode gave the same
> result as a nomral start iirc. I don't know if I have Windows-based
> domain controllers or not.
>
> With one method of starting, it displays a list of files started and
> the last one shown relates to "Loaded driver amdagp.sys", which is
> also in the boot log and is the last succesful load before all the
> "Did not load driver" lines. Although I learned in win98, it could
> do a lot of things without displaying anything
>
> I can't find anything equivalent to win98 step-by-step booting. I
> miss that.
>
>
>
> Here is the start of the ntbtlog.txt, 24 successful lines, followed by
> hundreds of "Did not load driver" lines with occasional lines
> interspersed like:
> Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
> Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys
>
> --start log--
> Service Pack 3 5 25 2009 19:15:54.500
> Loaded driver \WINDOWS\system32\ntoskrnl.exe
> Loaded driver \WINDOWS\system32\hal.dll
> Loaded driver \WINDOWS\system32\KDCOM.DLL
> Loaded driver \WINDOWS\system32\BOOTVID.dll
> Loaded driver ACPI.sys
> Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
> Loaded driver pci.sys
> Loaded driver isapnp.sys
> Loaded driver viaide.sys
> Loaded driver \WINDOWS\System32\DRIVERS\PCIIDEX.SYS
> Loaded driver MountMgr.sys
> Loaded driver ftdisk.sys
> Loaded driver PartMgr.sys
> Loaded driver VolSnap.sys
> Loaded driver atapi.sys
> Loaded driver disk.sys
> Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
> Loaded driver fltmgr.sys
> Loaded driver sr.sys
> Loaded driver Fastfat.sys
> Loaded driver KSecDD.sys
> Loaded driver NDIS.sys
> Loaded driver Mup.sys
> Loaded driver amdagp.sys
> Did not load driver Advanced Configuration and Power Interface (ACPI)
> PC
> Did not load driver Audio Codecs
> Did not load driver Legacy Audio Drivers
> Did not load driver Media Control Devices
> Did not load driver Legacy Video Capture Devices
> ,,,,
>
> In the middle a few lines like
> ....
> Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
> Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys
> ....
> amongst hundreds of other "Did not load driver" lines.
>
>
> And finally, the final lines of the log are:
> ....
> Loaded driver Fastfat.SYS
> Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS
> Did not load driver Processor
> Did not load driver ECP Printer Port
> Did not load driver Communications Port
> Did not load driver Communications Port
> Did not load driver CMI8738/C3DX PCI Audio Device
> Did not load driver ATI Technologies Inc. 3D RAGE II+ PCI
> Did not load driver Audio Codecs
> Did not load driver Legacy Audio Drivers
> Did not load driver Media Control Devices
> Did not load driver Legacy Video Capture Devices
> Did not load driver Video Codecs
> Loaded driver \SystemRoot\System32\DRIVERS\ndisuio.sys
> --end log--
>
> Thanks a lot for any help you can give.

mm
Posts: 38
Joined: 28 Jul 2009, 23:00

Re: XP start up doesn't work, stops at empty screen, after W

Post by mm »

On Wed, 29 Jul 2009 20:25:33 -0700, "Rich Barry" <rbarry@socal.rr.com>
wrote:

>Check below on doing a Repair Install. You will need a WinXP CD.
> http://michaelstevenstech.com/XPrepairinstall.htm

Thanks. This is just what I need, I realize now that you suggest it.

Can I autostream both SP2 and SP3? It gives instructions for SP2, and
I presume I can just do the same thing for SP3 after I do SP2, right?

My XP CD is prior to SP1, but aiui I don't have to apply SP1 since I
have SP2, right?

Do you recommend the Autostreamer? I notice that it's not listed on
www.autopatcher.com anymore but other pages make it look pretty good.

Thanks again, MM


>"mm" <NOPSAMmm2005@bigfoot.com> wrote in message
>>I suddently can't start XP.
>>I am on the same computer but running win98 now and I would look at
>> the events that the event-viewer displays but I can't guess what the
>> file name would be.

FWIW, I found the names of the events files and looked in all of them,
and then noticed the dates, all days before I had any trouble.
>>

pa bear [ms mvp]
Posts: 117
Joined: 01 Mar 2009, 00:00

Re: XP start up doesn't work, stops at empty screen, after W

Post by pa bear [ms mvp] »

mm wrote:
> I suddently can't start XP.
<snip>
> I didn't install anything or change anything except that yesterday I
> did install in Firefox3 an add-on called Stylish recommended by a
> smart guy in the netcape.public.mozilla.broswer newsgroup, with one
> script that makes visited links display in red in Firefox/Google...

Well, it certainly sounds like you installed and changed a couple of things,
doesn't it?

singapore computer servic
Posts: 11
Joined: 05 Jul 2009, 23:00

Re: XP start up doesn't work, stops at empty screen, after W

Post by singapore computer servic »

Hello,

Try restoring your system using the XP installation disc.

See http://support.microsoft.com/kb/307545 - How to recover from a corrupted
registry that prevents Windows XP from starting


Regards,
Singapore Computer Home Repair Service
http://www.bootstrike.com/ComputerService/
Video Conversion VHS Video8 Hi8 Digital8 MiniDv MicroMv
http://www.bootstrike.com/VHSVideoConvert/
"mm" <NOPSAMmm2005@bigfoot.com> wrote in message
news:6hp1759eplclcu6qli5dj7n0bp0g6juq7u@4ax.com...
>I suddently can't start XP.
>
> I am on the same computer but running win98 now and I would look at
> the events that the event-viewer displays but I can't guess what the
> file name would be.
>
> I didn't install anything or change anything except that yesterday I
> did install in Firefox3 an add-on called Stylish recommended by a
> smart guy in the netcape.public.mozilla.broswer newsgroup, with one
> script that makes visited links display in red in Firefox/Google. I
> had that installed for hours yesterday, then hibernated, and started
> up today and again ran with it installed for hours.
>
> (But it's not trying to start out of hibernation now afaict, and I'm
> not starting Firefox.)
>
> Today I was out of the room and I came back and it looked like XP
> restarted, but only got as far as the blank (blue in my case) screen
> after the Welcome to XP screen.
>
> The screen that would have icons and a task bar in a few seconds if it
> were working.
>
> Trying to Start with last Working Configuration gave the same results.
>
> Trying to start in debugging mode gave the same results with no
> indication of why it is called debugging mode. (OH, I see now it uses
> another computer and a serial cable. Oh well.)
>
> Trying to Start in Safe Mode yielded the question, roughtly: Do you
> want to Restore? When I said No, I got a blank black screeen with
> "Safe Mode in all four corners and a file name in something on the top
> line.
> When I said Yes, I got a mesage that: Restore cannot
> protect my computer.
>
> Trying to start with the Directory Service Restore Mode gave the same
> result as a nomral start iirc. I don't know if I have Windows-based
> domain controllers or not.
>
> With one method of starting, it displays a list of files started and
> the last one shown relates to "Loaded driver amdagp.sys", which is
> also in the boot log and is the last succesful load before all the
> "Did not load driver" lines. Although I learned in win98, it could
> do a lot of things without displaying anything
>
> I can't find anything equivalent to win98 step-by-step booting. I
> miss that.
>
>
>
> Here is the start of the ntbtlog.txt, 24 successful lines, followed by
> hundreds of "Did not load driver" lines with occasional lines
> interspersed like:
> Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
> Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys
>
> --start log--
> Service Pack 3 5 25 2009 19:15:54.500
> Loaded driver \WINDOWS\system32\ntoskrnl.exe
> Loaded driver \WINDOWS\system32\hal.dll
> Loaded driver \WINDOWS\system32\KDCOM.DLL
> Loaded driver \WINDOWS\system32\BOOTVID.dll
> Loaded driver ACPI.sys
> Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
> Loaded driver pci.sys
> Loaded driver isapnp.sys
> Loaded driver viaide.sys
> Loaded driver \WINDOWS\System32\DRIVERS\PCIIDEX.SYS
> Loaded driver MountMgr.sys
> Loaded driver ftdisk.sys
> Loaded driver PartMgr.sys
> Loaded driver VolSnap.sys
> Loaded driver atapi.sys
> Loaded driver disk.sys
> Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
> Loaded driver fltmgr.sys
> Loaded driver sr.sys
> Loaded driver Fastfat.sys
> Loaded driver KSecDD.sys
> Loaded driver NDIS.sys
> Loaded driver Mup.sys
> Loaded driver amdagp.sys
> Did not load driver Advanced Configuration and Power Interface (ACPI)
> PC
> Did not load driver Audio Codecs
> Did not load driver Legacy Audio Drivers
> Did not load driver Media Control Devices
> Did not load driver Legacy Video Capture Devices
> ,,,,
>
> In the middle a few lines like
> ....
> Loaded driver \SystemRoot\System32\DRIVERS\rdbss.sys
> Loaded driver \SystemRoot\System32\DRIVERS\mrxsmb.sys
> ....
> amongst hundreds of other "Did not load driver" lines.
>
>
> And finally, the final lines of the log are:
> ....
> Loaded driver Fastfat.SYS
> Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS
> Did not load driver Processor
> Did not load driver ECP Printer Port
> Did not load driver Communications Port
> Did not load driver Communications Port
> Did not load driver CMI8738/C3DX PCI Audio Device
> Did not load driver ATI Technologies Inc. 3D RAGE II+ PCI
> Did not load driver Audio Codecs
> Did not load driver Legacy Audio Drivers
> Did not load driver Media Control Devices
> Did not load driver Legacy Video Capture Devices
> Did not load driver Video Codecs
> Loaded driver \SystemRoot\System32\DRIVERS\ndisuio.sys
> --end log--
>
> Thanks a lot for any help you can give.

Post Reply