dvd drive not working

Here you can find everything you need to know about Dll-Files. You can also share your knowledge regarding the topic.

Moderators: DllAdmin, DLLADMIN ONLY

Post Reply
badgolferman
Posts: 2
Joined: 20 Nov 2009, 00:00

dvd drive not working

Post by badgolferman »

I am having some trouble with my NEC 3550A DVD drive in Windows XP SP3.
The drive is not visible in Explorer and cannot be accessed. The
Device Manager does show the drive but informs me the driver is missing
or corrupted (Code 39).

I have uninstalled the DVD drive numerous times from the Device Manager
and either rebooted or ran the Add Hardware Device applet. In each
instance the OS finds the Plug and Play device and installs the device
drivers but informs me that it couldn't do it properly. I have
replaced the IDE cable and tried out a known good DVD drive as a
replacement but continue to get the same result. The BIOS recognizes
the drive.

Now I suspected bad generic drivers for the test. NEC does not provide
drivers but does have updated firmware. I tried that to no avail. The
Device Manager shows four driver files as being used by the hardware
device: cdrom.sys, imapi.sys, redbook.sys, storprop.dll. I deleted
them all and they were immediately replaced by the service that
protects critical files. I even replaced them with copies from a
working XP computer. Fearing a defective Secondary IDE Channel, as a
last attempt I booted from a bootable CD-ROM and it came up fine.

Considering the drive works outside of Windows what else can I do to
troubleshoot and repair this issue?

jose
Posts: 126
Joined: 17 Apr 2009, 23:00

Re: dvd drive not working

Post by jose »

On Nov 19, 10:49

badgolferman
Posts: 2
Joined: 20 Nov 2009, 00:00

Re: dvd drive not working

Post by badgolferman »

Jose, 11/19/2009,10:56:25 PM, wrote:

> On Nov 19, 10:49

Post Reply