Forum - DLL-files.com

Had Error Crypt32-internet was not present, or at least inbound. I tried a
couple fixes and now when I turn on the computer I get the first screen, then
the second which shows "To see post screens, press ESC" and "To see setup
Screens press F2". I can not do either. My keyboard lights flash when the
machine starts but does not show anything (num lock light) and does not seem
to work.

I have tried F8, but nothing is happening and the disk will not boot the
system.

I am looking at a complete install if possible.

I did have the
"Windows could not start because of an error in the software. Please report
problem as: load needed DLL's for kernel" I did an new Windows XP home
install and now I have the problem above.

Any help??
--
dhmich

When you say you did a new WinXP Home install, do you mean you
formatted the drive and did a clean install or tried to do a install over
the present OS.?
"dhmich" <dhmich@discussions.microsoft.com> wrote in message
news:C4EB4FF1-2DA3-4C30-BC97-9100E754ECAA@microsoft.com...
> Had Error Crypt32-internet was not present, or at least inbound. I tried
> a
> couple fixes and now when I turn on the computer I get the first screen,
> then
> the second which shows "To see post screens, press ESC" and "To see setup
> Screens press F2". I can not do either. My keyboard lights flash when
> the
> machine starts but does not show anything (num lock light) and does not
> seem
> to work.
>
> I have tried F8, but nothing is happening and the disk will not boot the
> system.
>
> I am looking at a complete install if possible.
>
> I did have the
> "Windows could not start because of an error in the software. Please
> report
> problem as: load needed DLL's for kernel" I did an new Windows XP home
> install and now I have the problem above.
>
> Any help??
> --
> dhmich